1.IDENTIFICATION OF THE PRODUCT AND COMPANY

-------------------------------------------------------------------------------------------------------------------------------------

Product name        :  PP synthetic paper

Chemical description  :  Polyolefin film

Supplier            :  SUPREME  DEVELOPMENT COMPANY  LIMITED

                                                 Tian Liao Industrial Area No.2TM1 Unit 1,2,3 , A Zone, Gong Ming Town,Guang Ming New District,Shenzhen,China.

Emergency telephone  :0755-2719 7333

2.COMPOSITION/INFORMATION ON INGREDIENTS

-------------------------------------------------------------------------------------------------------------------------------------

CONTENT %       COMPOSITION

10~100              Polypropylene

0~90                Modifier

0~90                Filler

0~30                Other

3.HAZARDS IDENTIFICATION

------------------------------------------------------------------------------------------------------------------------------------Health Hazardous Components  :  None

4.FIRST AID MEASURES

-------------------------------------------------------------------------------------------------------------------------------------InhalatioInhalation :   Remove patient from exposure, keep warm and at rest. Obtain medical attention if ill

effects occur.

Skin Contact :  Wash skin with water.

Eye Contact :  Irrigate with eyewash solution or clean water. Obtain medical attention if ill effects occur.

Ingestion   :  Wash out mouth with water. Obtain medical attention if ill effects occur.

Futher Medical Treatment  :  Symptomatic treatment and supportive therapy as indicated.

5.FIRE FIGHTING MEASURES

-------------------------------------------------------------------------------------------------------------------------------------

Extinguishing Medical  :  Foam,CO2,dry powder, water spray.

Special Fire Precaution  :   Respiratory and eye protection required for fire fighting personnel.

Hazardous Combustion Product  :  Carbon Monoxide (CO) and Carbon Dioxide (CO2).

6.ACCIDENTAL RELEASE MEASURES

-------------------------------------------------------------------------------------------------------------------------------------

Personal precautions         :  It must put on respiratory protective when will combustion.

Environmental precautions    :  To avoiding raise dust when will crushing.

PAGE 2 OF 3

Methods for cleaning       :  1.Sweep up spilled material and place in suitable containers for recycle or disposal.

                                                            2.Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.

7.HANDLING AND STORAGE

-------------------------------------------------------------------------------------------------------------------------------------

Handling     : Sweep up spilled material and place in suitable containers for recycle or disposal.

Storage      : Storage in a ventilation place.

8.EXPOSURE CONTROLS/PERSONAL PROTECTION

-------------------------------------------------------------------------------------------------------------------------------------

Engineering control measures/ventilation:

   Local exhaust vemtilation of process equipment may be needed to control aerosol exposures to below the

Recommended threshold exposure limit, See personal protection recommendations.

Personal protection:

1.       Eye---When film is crushed, must wear safety glasses with side shields.

2.       Body---Where contact may occur with hot materials, wear thermal resistant gloves, arm protection and a                   f ace shields.

3.       Skin---In normal state, the skin contacts film to be no problem, but, when it is heated and cutted, it must be protected.

4.       Inhalation---

A.      While processing this material, adequate ventilations is required. The use of local exhaust ventilation is recommended to control process emissions near the source.

B.      Where overexposure by inhalation may occur and engineering, work practice or other means of exposure reduction are not adequate, approved respirators may be necessary.

9.PHYSICAL AND CHEMICAL PROPERTIES

-------------------------------------------------------------------------------------------------------------------------------------

 There are inxicative values only and should not be regarded as product specification.

 Physical state---Solid                                                       Form---Sheet

 Colour---White                                                                  Odor---Odorless

 PH value---Not applicable                                              Boiling point/ Boiling point range---Not applicable

 Decomposition temp.---300℃↑               Flashpoint---330℃↑

 Autoignition temp.---Not available             Explosive limits(in air vol%)--- Not available

 Vapor pressure(kpa)--- Not available            Vapor density(g/cm³)---air=1

 Specific gravity---1.14~1.20                   Solubility(in water)---Insoluble

10.STABILITY AND REACTIVITY

-------------------------------------------------------------------------------------------------------------------------------------

Stability---Stable

Hazardous reaction for special condition---High temperature burning will produce CO­­2 and CO.

Conditions to avoid(incompatability)---PET,PVC and PS.

                                                                                                                                                                                           PAGE 3 OF 3

Hazardous decomposition product---Carbon dioxide(CO­­2) and Carbon monoxide(CO).

11.TOXICOLOGICAL INFORMATION

-------------------------------------------------------------------------------------------------------------------------------------Acute Acute toxicity---None.

Local effect---None.

Acute---None

Chronic toxicity---None.

Special effect---High temperature burning will produce CO­­2 and CO.

12.ECOLOGICAL INFORMATION

-------------------------------------------------------------------------------------------------------------------------------------

 Ecotoxicity---Do not release to the environment, and it can be recycle.

13.DISPOSAL CONSIDERATIONS

-------------------------------------------------------------------------------------------------------------------------------------

Waste disposal method---Sweep up spilled material and place in suitable containers for recycle or disposal in  accordance with regulations.

14.TRANSPORT INFORMATION

-------------------------------------------------------------------------------------------------------------------------------------

 Not classified as hazardous for transport . Dangerous according to transport regulations.

15.REGULATORY INFORMATION

-------------------------------------------------------------------------------------------------------------------------------------

Classification---Not classified as hazardous to users.

16.OTHER INFORMATION

-------------------------------------------------------------------------------------------------------------------------------------

 This data sheet was prepared in accordance with directive product.

 Date/Version---06/29/2009/01

 Date of priting---06/29/2009